雙效一體式磁懸浮Double Effect Integral Magnetic Bearing Chiller

機組介紹 Product Introduction:

1.    不銹鋼水箱----使用壽命長，帶冷卻水循環，水位報警及補水作用。

Stainless steel water tank, longer service life, with cooling water circulation, water level alarm and hydration.

2.       微板降膜蒸發冷凝器----納米防腐親水涂層，徹底杜絕換熱器表面被氧化腐蝕，保證水膜均勻，提高換熱效率。

Micro-plate falling film evaporative condenser--Nano anti-corrosion hydrophilic coating, completely prevent the surface of the heat exchanger from being oxidized and corroded, ensuring uniform water so as to improves heat transfer efficiency.

3.       進風導流過濾裝置---過濾空氣保證水系統清潔度，優化進風氣流組織，使水膜均勻布滿換熱器表面。

Inlet air diversion filter device---clean air ensure the cleanliness water system, optimize the air flow organization, so that the film evenly covers the surface of the heat exchanger.

4.       變頻磁懸浮壓縮機---磁懸浮軸承無需機械摩擦，無需潤滑油，噪音降低至73dBA, 直流變頻永磁電機啟動電流2A, 轉速4800RMP, 調速范圍寬控溫更加精準。

Variable frequency magnetic bearing compressor--magnetic bearing without mechanical friction, no lubricating oil, noise as low as 74dBA, DC variable frequency permanent magnet motor start electrophoresis 2A, speed 48000RMP, wide temperature control range is more accurate.

低冷凝溫度，高效制冷 Low condensing temperature, high efficient cooling

一體化集成設計 Integral design

磁懸浮壓縮機   Magnetic bearing chiller

節能50%以上   Energy saving more than 50%

啟動電流僅需   2A Starting current only 2A

遠程控制       Remote control

產品特點Product Characteristic

一體化設計，全工況配載，整體式制造，經過多項國標級檢測項目合格后出廠，充分保證了機組的最佳運行狀態:

Machine with integral design, all conditions and integral manufacturing, qualified by global inspection items, fully guaranteed by the best running status of the unit

一步到位 Step System:

磁懸浮壓縮機+蒸發式冷凝器+蒸發器+冷卻水泵+水管路+安裝配件+控制系統

Magnetic Bearing Compressor + Evaporative Condenser + Evaporator + Cooling Water Pump + Water Pipe Line + Installation Accessories + Control System

蒸發冷中央控制系統特點 Evaporative condensation central control system features

1. 主機采用蒸發冷磁懸浮機組，機組包含原有冷水機組+水泵+冷卻塔相關功能，結構緊湊，體積小，無需專有制冷主機房，放置菇房外空置區域即可。

The main engine adopts the evaporative condensation magnetic bearing chiller. The machine includes chiller+water pump+cooling tower and other related functions. The structure is compact and the volume is small. There is no need for a dedicated machine room, it can be installed outside the room.

2. 節省原冷凍系統主管路，減少管路過長帶來的冷量損失，冷凍水系統采用PVC給水管，導熱系數低，保溫效果好，阻力損失小。

Save the main pipeline of the original refrigeration system and reduce the loss of cooling capacity caused by the long pipeline. The chilled water system uses PVC water supply pipe with low thermal conductivity, good thermal insulation effect and low resistance loss.

3. 減少冷凍水泵楊程，水泵功率降低20%-30%左右，可降低水泵運行車成本。

Reduce the head of the chilled water pump, and reduce the power of the pump by 20%-30%, which can reduce the running cost of the pump.

4. 相鄰小型中央控制主機設備可直接通過并聯管路進行系統互為備用。

Adjacent small central control main machine directly use the parallel pipeline for standby.